FINAL PROGRAM:
Tuesday June 11, 2024
09.30 – 10.15: Registration with refreshments
10.15 –10.30: Welcome and Introduction
Carl-Magnus Lancelot, Thermo-Calc Software
10.30 – 11.10: News from Thermo-Calc Software: Thermo-Calc, DICTRA, TC-PRISMA and databases
Carl-Magnus Lancelot, Thermo-Calc Software
11.10 – 11.35: Design of oxidation resistant Nb-Si alloys aided by computational thermodynamics
Claire Utton, University of Sheffield
11.35 – 12.05: Short break with snacks and drinks
12.05 – 12.30: Using DICTRA to simulate external oxidation for steel tubes in high temperature processing applications
Megan Kendall, Swansea University Bay Campus
12.30 – 12.50: Simulation of solidification and phase formation in the Mg-rich corner of Mg-Ca-Zn alloys
Yanheng Xie, University of Sheffield
12.50 – 13.10: Assessing the Printability of Steels with Computational Thermodynamics and Machine Learning
Raymond Wong, Imperial College London
13.10 – 14.30: Lunch in the Turner Museum
14.30 – 14.50: Optimisation of advanced steel design for fusion energy applications
David Bowden, UK Atomic Energy Agency
14.50 – 15.10: Design of new boron-strengthened reduced activation ferritic-martensitic steels for fusion
Jack Haley, UK Atomic Energy Agency
15.10 – 15.30: The Preliminary research of NbTiZr-X (X=Al, Mo, Ta, W, Cr) of RCCAs through Thermo-Calc
Yu-Hsuan Lee, University of Sheffield
15.30 – 16.00: Short break with snacks and drinks
16.00 – 16.25: Mean-field model for hydride evolution within Zircaloys
Connor Cladingboel, University of Sheffield
16.25 – 17:00: Demonstration of Additive Manufacturing model, with the new Keyhole model and printability maps
Magnus Anderson, Thermo-Calc Software
19:30: Dinner
Location TBA
Wednesday June 12, 2024
09.00 – 09.30: Registration with refreshments
09.30 – 09.40: Day 2 Welcome and Introduction
Carl-Magnus Lancelot, Thermo-Calc Software
09.40 – 10.00: Designing new ultra-radiopure, high-strength electroformed CuCr alloys, for rare event searches
Dimitra Spathara, University of Birmingham
10.00 – 10.20: Phase Prediction and Validation of AlSiFeCrCoNi Multi Principal Element Alloys
Thon Thongklom, University of Sheffield
10.20 – 10.40: Application of Thermo-Calc with machine learning towards the design of carbon reinforced high entropy alloys for metal forming tooling applications
Joshua Berry, University of Sheffield
10.40 – 11.05: Thermo-Calc calculations of gas turbine engine mineral deposit melting temperatures
Jacob Elms, University of Manchester, Earth and Environmental Sciences
11.05 – 11.30: Short break with snacks and drinks
11.30 – 11.55: Ordering regimes in Zirconium Carbides
Theresa Davey, Bangor University, Wales
11.55 – 12.20: Experimental investigation and thermodynamic modelling of WC-40Fe-20Co-40Ni
Tomas Soria Biurrun, CEIT, Spain
12.20 – 12.45: Enhancing industrial materials using ICME
Hoda Dini, Questek Europe
12.45 – 13.00: Closing remarks / Wrap Up
13.00 – 14.30: Lunch in the Turner Museum
14.30 – 16.00: Tour of the Royce Centre
View the Program as a PDF
LOCATION:
Sir Robert Hadfield Building, University of Sheffield
Turner Museum of Glass and Lecture room LT21